Hi Mike:
Mine is like Eric's – when I select Action >> Divide the box for the number of divisions is on focus and I can enter the number I want directly without doing anything.
George
Search found 700 matches
- Tue Sep 09, 2014 10:25 pm
- Forum: RealCADD
- Topic: Dividing dialogue
- Replies: 9
- Views: 9163
- Mon Sep 08, 2014 10:26 pm
- Forum: RealCADD
- Topic: Edit Menu – x and y positions
- Replies: 1
- Views: 4410
Edit Menu – x and y positions
I've always had a bit of trouble using the x and y coordinates in the Edit menu – so I've been experimenting! Here are the results: Assume we have a vertical line, so x1 and x2 are the same. My drawing was at 1:20 scale in mm – not that that matters. Move : Entering -500 in the x1 and x2 boxes moves...
- Mon Sep 08, 2014 11:53 am
- Forum: iPocket Draw
- Topic: Mirror and rotate suggestion/request
- Replies: 4
- Views: 31915
Re: Mirror and rotate suggestion/request
Hi Mike I think you can do all of that in RealCADD ok. "⌘M >> Circular >> First Circle or Arc" gives you multiple rotations about any centre you choose (I usually select "or next click" because my pivot point is usually already drawn, so I don't have to fuss about the actual x an...
- Fri Sep 05, 2014 7:53 pm
- Forum: RealCADD
- Topic: Scaling and Dimensions-a new thread
- Replies: 9
- Views: 10475
Re: Scaling and Dimensions-a new thread
Oh – I think just as it is now – by a multiple. We are only suggesting renaming an existing function really. Then if you want to resize something from 3¼" to 5½" say, you just do the sum 5.5/3.25 = 1.692 and use that as the resizing factor. If something is made up of lots of lines, curves,...
- Fri Sep 05, 2014 3:31 pm
- Forum: RealCADD
- Topic: Scaling and Dimensions-a new thread
- Replies: 9
- Views: 10475
Re: Scaling and Dimensions-a new thread
Yes Mike – my resized 5" pulley will dimension at 5" and if I move it 6" down the mast, it moves 6". Because it's still at the same scale (the Drawing Scale) – just bigger. I really think if Eric changed the "Action >> Scale" function to read "Action >> Resize"...
- Fri Sep 05, 2014 1:43 pm
- Forum: RealCADD
- Topic: Scaling and Dimensions-a new thread
- Replies: 9
- Views: 10475
Re: Scaling and Dimensions-a new thread
Hi Mike I think the problem is partly one of semantics. The Drawing Scale is getting confused with the Scale command. I really think that the Scale command is just as it should be – it scales an object – makes it smaller or bigger – but doesn't change the actual drawing scale of the object, the draw...
Re: ⌘M
Not confusing NULL with Zero are we Eric!!!!
- Fri Sep 05, 2014 1:01 am
- Forum: RealCADD
- Topic: Scaling and Dimensions-a new thread
- Replies: 9
- Views: 10475
Re: Scaling and Dimensions-a new thread
Um ... I've had a few glasses of red wine after a hard day splitting logs in readiness for the winter – so I may not be getting the point perfectly. But if you scale a drawing to a new scale and then wish to continue drawing at the new scale, you need to set the scale of that layer to the new scale ...
Re: Rescaling
Mike – All my drawings, when printed out, have to be to scale (I mean a scale that is on a scale rule) and that is true of pretty much all engineering, constructional and architectural etc. drawings. So starting with a scale in mind is not so much of a hardship – in fact it seems normal to me. You c...
- Wed Sep 03, 2014 12:32 pm
- Forum: RealCADD
- Topic: Windowshades
- Replies: 3
- Views: 5508
Re: Windowshades
Oh! I didn't read your post properly – I though you wanted the Print window to stay open – but on re-reading I see it is the Edit menu. So I'm glad to have been of help
Cheers - George
Cheers - George