Bug!

2D CAD software for Windows, Mac OS X and Linux
Post Reply
debenriver
Posts: 696
Joined: Sat Dec 03, 2011 9:19 pm
Location: Maine USA and Suffolk England
Contact:

Bug!

Post by debenriver »

Hi Eric

With v. 5.00b1 there is a bug with Hatches (and Textures):

A hatch or texture (any pattern) comes out as Colour: white; Line thickness: 0...

Line thickness goes to 0... regardless of both the default for the drawing and the Line thickness set on the Hatch window.

And worse - Line thickness stays at 0.... unless you actually go and change it, so defeating the default.

Cheers -- George :D

Edit: And the ability to draw a perpendicular from an end point, centre point or intersection (using Option-Space) seems not to work any more? :( After hitting Option-Space, it picks up the end point, centre point or intersection OK but the subsequent line isn't restrained to be perpendicular to the original line.
Eric Pousse
Posts: 1064
Joined: Sat Dec 03, 2011 12:31 pm
Location: Tours - France

Re: Bug!

Post by Eric Pousse »

Bonjour George,

Thank you for this feedback, I will check.

Cordialement.
Eric Pousse
Post Reply