Another little bug
Posted: Thu Feb 06, 2020 12:04 pm
Hi Eric
The Measure tool seems to have gone a bit screwy!
It's fine on horizontal measurements (measuring between vertical lines). Measuring between angled lines it gradually gets more out of alignment as the angle of the lines approaches horizontal. So at 45º it's pretty much OK. At 20º it's starting to be noticeable.
Rotated text is fine.
The Single dimension tool has the same problem; haven't checked the Multiple dimension tool ....
Cheers -- George
The Measure tool seems to have gone a bit screwy!
It's fine on horizontal measurements (measuring between vertical lines). Measuring between angled lines it gradually gets more out of alignment as the angle of the lines approaches horizontal. So at 45º it's pretty much OK. At 20º it's starting to be noticeable.
Rotated text is fine.
The Single dimension tool has the same problem; haven't checked the Multiple dimension tool ....
Cheers -- George