Minor library glitch

2D CAD software for Windows, Mac OS X and Linux
Post Reply
debenriver
Posts: 696
Joined: Sat Dec 03, 2011 9:19 pm
Location: Maine USA and Suffolk England
Contact:

Minor library glitch

Post by debenriver »

Hi Eric

There is still a bit of a glitch with library objects and scale.

When you put a library object at scale, it scales perfectly correctly to the scale of the drawing you are putting it on. So all is good.

But in the Edit pane it shows as its original scale – so before you go any further, you have to be sure to change the scale on the library object to the drawing scale.

Here's a short movie to demonstrate what I mean

https://www.whisstock.com/library_scale.mov

Cheers -- George
Eric Pousse
Posts: 1064
Joined: Sat Dec 03, 2011 12:31 pm
Location: Tours - France

Re: Minor library glitch

Post by Eric Pousse »

Yes George,

A priori, the dimension are good and resized and it is only the indication of the scale which is not good.

I will fix that.

Thanks.
Eric Pousse
debenriver
Posts: 696
Joined: Sat Dec 03, 2011 9:19 pm
Location: Maine USA and Suffolk England
Contact:

Re: Minor library glitch

Post by debenriver »

Absolutely.

Objects are scaled perfectly correctly. Just the scale shows wrong in the Edit pane.

Thanks Eric

Cheers -- George
Post Reply