Page 1 of 1

Parallels/Cutting tool

Posted: Thu Jul 29, 2021 7:57 pm
by Mikerosen
Eric,
When I tap the M (cutting tool) I get a parallels dialogue box. Is that an error? I'm using 5.02 on Mac 11.4. Also, in the Main toolbar, at the bottom, the Parallels tool is first, and I have to use the flyout to get to the cutting tool. Can they be reversed? Of course, if M will bring up the cutting tool, that won't matter!

Merci!

Re: Parallels/Cutting tool

Posted: Thu Jul 29, 2021 10:12 pm
by debenriver
Hi Mike

The problem only happens if Static parallels is selected. If you select Dynamic parallels then the 'M' keystrokes work OK:

M = Parallels
MM = Cutting tool
MMM = Scissors
MMMM = Rotation tool

There is a similar problem with Cut and extend:

U = Cut and extend
UU = Cut and extend with chamfer
UUU should equal Cut and extend with fillet, but instead it just enters a 'u' in the L1 option of Cut and extend with chamfer.

Cheers -- George

Re: Parallels/Cutting tool

Posted: Fri Jul 30, 2021 7:30 am
by Eric Pousse
Bonjour Mike and George,

This windows appear because the tools need some settings.
Number and Distance for parallels in static mode, here.

Perhaps I have to keep last settings in the preferences, to not display this windows at each new launch of RealCADD.

Cordialement.

Re: Parallels/Cutting tool

Posted: Fri Jul 30, 2021 11:23 am
by debenriver
Good morning Eric!

Most of the tools with .. after them require a double-click to bring up their preferences panel, which works well and seems logical. And a quick double, triple or quadruple keystroke moves you horizontally along the related tools, both those with .. and those without. All good :mrgreen:

But "Parallels – Static", "Cut and extend with chamfer" and "Cut and extend with fillet" all bring up their preferences panel with a single click - which is a bit inconsistent. And you can't use the keystroke UUU to get to Cut and extend with fillet.

If you delete everything in the Parallel – Dynamic preferences panel and then double-click it has defaulted to 0 in the No. box – so it has provided itself with at least one setting – which is perhaps why MM and MMM and MMMM will always work if Dynamic is selected ????

However "Cut and extend with chamfer" also defaults to L1=0 but UUU doesn't work .....

It would be good if they all worked consistently either with an initial default value or the stored last value, or something ...

Cheers -- George

PS - The Rotation tool has .. but double clicking doesn't bring up anything!

Re: Parallels/Cutting tool

Posted: Sat Jul 31, 2021 2:10 pm
by Mikerosen
George,

I wasn't aware of the double and triple tap. I've been using the mouse to access the "inner" tiles. That will help a lot, thanks!

Eric,

Yes, saving preferences and settings would help a lot! Merci.

Re: Parallels/Cutting tool

Posted: Sat Jul 31, 2021 10:51 pm
by debenriver
Hi Mike

It took me a while to realize this too! Really when M stopped working for the cutting tool and I discovered MM worked (actually I think I had to ask Eric ...).

So, working from the top, you can do:

Esc, S, H, Z
A, AA
L, LL, LLL, LLLL
R, RR, RRR, RRRR
O, OO, OOO, OOOO
D, DD, DDD, DDDD
Y, YY, YYY, YYYY
Q, QQ, QQQ
QQQQ, QQQQQ, QQQQQQ
U, UU, but UUU doesn't work unless some data has already been entered in the UU (chamfer) panel.
M, MM, MMM, MMMM – but only if Dynamic Parallels is selected, or data has previously been entered in the Static Parallels panel

It's the last two that really need to be rationalized so they fit with all the others.

Six Q's boggles the mind a bit :mrgreen: but it does work.

I have to say that the only keystroke that I regularly use is MM – but the others are there and other users may use them more regularly than I do!

I've used capitals above, but on the keyboard you just hit the letters – no need to use the shift key.

Cheers -- George

Re: Parallels/Cutting tool

Posted: Mon Aug 02, 2021 11:17 am
by Eric Pousse
Bonjour George and Mike,

A new beta is available.

Thanks for your feedbacks.

Re: Parallels/Cutting tool

Posted: Thu Aug 05, 2021 10:35 pm
by debenriver
Works great now!

Thank you Eric

Cheers -- George