Page 1 of 1

RealCADD 4.21b1

Posted: Sun May 20, 2012 4:40 pm
by Eric Pousse
Bonjour,

A beta version of RealCADD 4.21 is available.
This version fixes the limit (127 pixels) of the size of the texts.
The new handles introduced in v4.20 are now displayed when the key "alt" or "option" is down when you move the mouse.
I have made also some internal changes to prepare a new version of the tool that I use to write RealCADD.
So some bugs can be found.

To download it :
http://www.adx-online.com/RealCADD_Mac_421b1.zip
http://www.adx-online.com/RealCADD_Windows_421b1.zip
http://www.adx-online.com/RealCADD_Linux_421b1.zip

Thanks

Re: RealCADD 4.21b1

Posted: Tue May 22, 2012 1:05 pm
by debenriver
Hi Eric

I downloaded the beta version. All looks good so far! No bugs yet. Thank you for making the changes :D

George

Re: RealCADD 4.21b1

Posted: Thu May 24, 2012 11:54 pm
by debenriver
Hi Eric

Actually I do seem to have a bug with parallel lines. If I put in, say, 800mm, when I click the line to make a parallel line, it goes to 0.8mm. If I click again it seems to go to 0.008mm. Then if I click again it goes to 8mm. Then another click makes it go to 1mm. Then 0.001mm and so on. So clicking the parallel line tool is changing the parallel settings (which you normally access by option-click). It does produce a parallel line, but very close to the original as the changed settings would suggest. I haven't tried it with a real big number - say 8000mm or 80000mm - or with any other numbers other than 8 (because that is what I was doing when I noticed the problem). I will go and see what happens.

:D :D

George

Re: RealCADD 4.21b1

Posted: Thu May 24, 2012 11:59 pm
by debenriver
OK - so 8000 produces 8 and 9000 produces 9. And I think .008 produced .000008 or something - but it looked like 1 - but it was actually 1 x e-6.

I think I'll go back to 4.20 just for the moment ..... Productivity has taken a dive into very small numbers!

Best

George

Re: RealCADD 4.21b1

Posted: Sat May 26, 2012 12:10 pm
by Eric Pousse
OK George, it is fixed, thanks !