Arcs.... and related to them

2D CAD software for Windows, Mac OS X and Linux
Post Reply
Caddy
Posts: 40
Joined: Tue May 19, 2015 6:35 pm

Arcs.... and related to them

Post by Caddy »

Bonjour Eric

Ok Eric, I think I found it, the way to solve my pending points. Do you have more of this top secrets in your app? :) :) :)
It's fine to use "Convert to lines", converting an arc to a set lines. And after to use "Convert to polygon" converting the set of arc lines in conjunction with my straight lines to that what I asked for as shown below.
Arc 2.png
Arc 2.png (9.18 KiB) Viewed 22428 times
The second picture shows a copy of the first arc, moved down and was vertically mirrored. All this was done before breaking to lines. But the result is something that needs some care from your side. :) I think so, maybe I'm wrong.
Arc 1.png
Arc 1.png (8.33 KiB) Viewed 22428 times
It's really not a problem for me, that the process to convert an arc to a sett of lines can't be reversed. I stored the original arcs at another layer and hide this layer. If I need to revise my drawing this will work.

Cordialement
Hubert
Post Reply