4.60 and Fillet & Chamfer

2D CAD software for Windows, Mac OS X and Linux
Post Reply
debenriver
Posts: 696
Joined: Sat Dec 03, 2011 9:19 pm
Location: Maine USA and Suffolk England
Contact:

4.60 and Fillet & Chamfer

Post by debenriver »

Hi Eric

It's me again - sorry!! :mrgreen:

I get a crash with the filler and chamfer tools. And the fillet and chamfer windows are incomplete. The chamfer looks like this (fillet looks much the same – no top part):
Screen Shot 2016-06-29 at 09.12.32.png
Screen Shot 2016-06-29 at 09.12.32.png (22.9 KiB) Viewed 3599 times
The first crash report comes after you have entered data and hit the OK button
Screen Shot 2016-06-29 at 09.06.45.png
Screen Shot 2016-06-29 at 09.06.45.png (30.67 KiB) Viewed 3599 times
And then this (after I hit the OK button on the crash window and then hit Don't save)
Screen Shot 2016-06-29 at 09.09.16.png
Screen Shot 2016-06-29 at 09.09.16.png (30.26 KiB) Viewed 3599 times
Fillet and Chamfer are fine on the Carbon version

Cheers -- George
Eric Pousse
Posts: 1064
Joined: Sat Dec 03, 2011 12:31 pm
Location: Tours - France

Re: 4.60 and Fillet & Chamfer

Post by Eric Pousse »

George,

Also fixed.

Thanks.
Eric Pousse
Post Reply