2D CAD software for Windows, Mac OS X and Linux
debenriver
Posts: 702 Joined: Sat Dec 03, 2011 9:19 pm
Location: Maine USA and Suffolk England
Contact:
Post
by debenriver » Wed Dec 01, 2021 11:27 am
Hi Eric
I hadn't thought about trying different fonts – I've used Helvetica for drawings for so many years!
Nos. 3, 5, 8 and 10 are pretty good – what fonts are they? I could change.
Cheers -- George
Eric Pousse
Posts: 1073 Joined: Sat Dec 03, 2011 12:31 pm
Location: Tours - France
Post
by Eric Pousse » Wed Dec 01, 2021 12:49 pm
George,
3 is Optima
5 Helvetica Neue
8 Candara
10 Avenir Next
But I didn't test all fonts...
Eric Pousse
Eric Pousse
Posts: 1073 Joined: Sat Dec 03, 2011 12:31 pm
Location: Tours - France
Post
by Eric Pousse » Wed Dec 01, 2021 12:59 pm
George,
What about something like this to update regular polygons?
Eric Pousse
debenriver
Posts: 702 Joined: Sat Dec 03, 2011 9:19 pm
Location: Maine USA and Suffolk England
Contact:
Post
by debenriver » Wed Dec 01, 2021 10:05 pm
Looks great to me
Will you be able to constrain the polygon to one of the constraint angles??
Cheers -- George
P.S. I'll use Helvetica Neue from now on – that's not too big a leap from Helvetica!! Thanks for that.
Eric Pousse
Posts: 1073 Joined: Sat Dec 03, 2011 12:31 pm
Location: Tours - France
Post
by Eric Pousse » Sun Dec 05, 2021 10:24 am
George,
A new development version (
5.20d2 ) is available.
I didn't try yet to constrain the polygon.
Cordialement.
Eric Pousse
debenriver
Posts: 702 Joined: Sat Dec 03, 2011 9:19 pm
Location: Maine USA and Suffolk England
Contact:
Post
by debenriver » Mon Dec 06, 2021 12:29 pm
Hi Eric
The polygons are great!
There are easy workarounds for constraint.
For the first two drawing modes, draw a line (at the "X" value) constrained to the angle you want – or set to the angle you want in Edit. Then draw the polygon snapping to the ends of the line.
For the Value drawing mode, just click on the screen and the polygon automatically draws aligned to the x and y axes – then use Rotation to set it to an angle – or the Rotation tool and snap.
All of these are pretty quick to do .... so if constraint is difficult to accomplish, there's really not a problem.
Cheers -- George
Eric Pousse
Posts: 1073 Joined: Sat Dec 03, 2011 12:31 pm
Location: Tours - France
Post
by Eric Pousse » Mon Dec 06, 2021 1:12 pm
George,
With the Value drawing mode, you can also use the same method than the first two drawing mode to have the polygon with a defined angle (the length of the line is not important only the angle).
Cordialement.
Eric Pousse
debenriver
Posts: 702 Joined: Sat Dec 03, 2011 9:19 pm
Location: Maine USA and Suffolk England
Contact:
Post
by debenriver » Fri Dec 10, 2021 12:55 pm
Hi Eric
In v.5.11d2 I get this error message regularly:
crash.jpg (91.2 KiB) Viewed 5970 times
It seems to happen when I move from the Text tool to the Select tool and click on the drawing.
It doesn't actually produce a crash – it just goes away when OK is clicked. But it comes back when i do the same manoeuvre – not always but often.
Cheers -- George
Eric Pousse
Posts: 1073 Joined: Sat Dec 03, 2011 12:31 pm
Location: Tours - France
Post
by Eric Pousse » Sat Dec 11, 2021 4:52 pm
Bonjour George,
Thank you, I see that and I will fix it quickly.
Eric Pousse
Eric Pousse
Posts: 1073 Joined: Sat Dec 03, 2011 12:31 pm
Location: Tours - France
Post
by Eric Pousse » Sun Dec 12, 2021 9:14 am
Bonjour George,
A new
version 5.20d3 is available.
The crash with the text tool is fixed, I think.
A new command has been added to menu "Align" : Center H + V
Cordialement.
Eric Pousse