Page 1 of 1
Saving to dxf or dwg crash
Posted: Tue Feb 09, 2021 3:00 pm
by debenriver
Hi Eric
While experimenting with creating files in different formats to be able to create SVG files I found that with some RealCADD drawings I get a crash when I save to DXF or DWG. Not all drawings and even with a drawing that does crash, some layers are OK (selecting only visible layers)
The error message is:
- Screenshot 2021-02-09 at 09.22.30.png (91.3 KiB) Viewed 6302 times
I guess the files that don't crash, don't have rectangles in them?? Though a test drawing with just rectangles saved perfectly OK. And I experimented by removing all rectangles and rounded rectangles from a drawing and it still crashed. So that doesn't totally make sense!
I also cleaned up the drawing I was using so there were no empty strings on the layers I was working with, but it still crashed ...
Cheers -- George
Re: Saving to dxf or dwg crash
Posted: Tue Feb 09, 2021 4:52 pm
by Eric Pousse
Thank you George, I was very close to release the version 5.02...
It would have been a pity to do it with another bug.
I will check for it.
Cordialement
Re: Saving to dxf or dwg crash
Posted: Tue Feb 09, 2021 5:00 pm
by Eric Pousse
George,
Can you send me a file with this problem?
I can't reproduce it.
Thanks
Re: Saving to dxf or dwg crash
Posted: Wed Feb 10, 2021 10:08 am
by Eric Pousse
Bonjour George,
I have fixed this bug and another.
Can you try
RealCADD 5.02b7, please?
Thanks.
Re: Saving to dxf or dwg crash
Posted: Wed Feb 10, 2021 9:37 pm
by debenriver
Hi Eric
That seems to have fixed the problem!
I wouldn't normally want to convert such a complex drawing (as the one I sent, that had problems) but I was experimenting with converting to DXF and then opening in Inkscape to convert to SVG.
Even now that RealCADD saves the drawing as a dxf (or dwg) file, Inkscape won't open it – I have tried further converting it to various DXF flavours (I think Inkscape wants R13 (Binary?)). Inkscape will open that but with no content!
Actually I hate DXF!!!!!
RealCADD will open the dxf file it created with no problem ...
Many thanks
Cheers -- George
Re: Saving to dxf or dwg crash
Posted: Thu Feb 11, 2021 9:01 am
by Eric Pousse
Yes DXF and DWG are complicated formats, only to prevent others from opening them simply and allow Autodesk to have fewer competitors...
Re: Saving to dxf or dwg crash
Posted: Fri Feb 12, 2021 8:35 pm
by debenriver
Hi Eric
Just a bit more information of saving to DXF vis à vis Inkscape. The problem appears to be text. If I remove all text from a RealCADD drawing and save to dxf, Inkscape can open it just fine – well with all the usual scale and fill problems that dxf has – but it opens directly. The moment I add text Inkscape won't open it and this is the error message:
- Screenshot 2021-02-12 at 15.32.43.png (142.38 KiB) Viewed 6277 times
Now I have no idea if this is peculiar to Inkscape or if it is a bug somewhere in the RealCADD to DXF process. But I figured it might be a useful bit of information?
Actually what DXF flavour does RealCADD save to? it would be useful to know that so I can tell my customers who will be downloading dxf files for CNC cutting (though there have been no problems so far at all – though in v-vcarve, you have to import them as vector files rather than just open them.
Inkscape seems to want R13. But it opens RealCADD>DXF files just fine. And converting a RealCADD file containing text to R13, doesn't help.
Cheers -- George
Re: Saving to dxf or dwg crash
Posted: Mon Feb 15, 2021 1:56 pm
by Eric Pousse
Yes George, I see that but the same file is opened with QCAD or with app from OpenDesign Alliance...